@mike12
Questions
Two forces are applied at point B of beam AB. Determine graphically the magnitude and direction of their resultant using (a) the parallelogram law, (b) the triangle rule.
View Question
Express the shear and moment function in terms of x and then draw the shear and moment diagrams for the beam.
View Question
The beam is subjected to a moment of 15 kip ft Determine the resultant force the bending stress produces on the top flange A and bottom flange B. Also compute...
View Question
If the gears are subjected to the torques shown, determine the required diameter of the A-36 steel shaft to the nearest mm if τ allow = 60 MPa.
View Question
The solid 30-mm-diameter shaft is used to transmit the torques applied to the gears. Determine the absolute maximum shear stress on the shaft.
View Question
Determine the average shear stress in the 20-mm diameter pin at A and the 30-mm diameter pin at B that support the beam.
View Question
The 60-mm-diameter shaft is made of 6061-T6 aluminum having an allowable shear stress of τ allow = 80 MPa. Determine the maximum allowable torque T. Also, find the corresponding angle...
View Question