mike12

nvm. I found the answer myself

Two forces are applied at point B of beam AB. Determine graphically the magnitude and direction of their resultant using (a) the parallelogram law, (b) the triangle rule.

Determine the average shear stress in the 20-mm diameter pin at A and the 30-mm diameter pin at B that support the beam.

The solid 30-mm-diameter shaft is used to transmit the torques applied to the gears. Determine the absolute maximum shear stress on the shaft.

If the gears are subjected to the torques shown, determine the required diameter of the A-36 steel shaft to the nearest mm if τ allow = 60 MPa.

The beam is subjected to a moment of 15 kip ft Determine the resultant force the bending stress produces on the top flange A and bottom flange B. Also compute the maximum bending stress developed in the...

Express the shear and moment function in terms of x and then draw the shear and moment diagrams for the beam.

Draw the shear and moment diagrams for the beam.

The 60-mm-diameter shaft is made of 6061-T6 aluminum having an allowable shear stress of τ allow = 80 MPa. Determine the maximum allowable torque T. Also, find the corresponding angle of twist of disk...